Why Did My Fudge Remain Smooth After Beating? | Ask Nigella.com (2024)

Full question

Hello, I made the Vanilla Fudge and despite whisking with electric beaters at the end the fudge was smooth and not grainy. Can you please tell me where I went wrong?

Our answer

Nigella's Vanilla Fudge is a traditional fudge recipe that is made by boiling butter, milk, condensed milk, sugar and golden syrup to soft ball stage. The fudge is then beaten as this makes the fudge slightly crumbly rather than chewy. Beating the mixture encourages the formation of small sugar crystals, which leads to the crumbly texture. The crystals may not be noticeable in themselves but the fudge mixture will thicken and turn from shiny to matte in appearance. When it sets, the fudge will be slightly crumbly when cut and should melt in the mouth.

It could be that there was an expectation of large sugar crystals rather than smaller ones. The beaten fudge will still look quite smooth and you will not notice large crystals when you eat the fudge. If the fudge is very soft and slightly chewy then it is possible that it did not quite cook to soft ball stage and next time the mixture should be cooked to a slightly higher temperature (soft ball is 112-116c/235-240F and a sugar or candy thermometer can help). Otherwise it could be that the fudge cooled too much before it was beaten. The mixture will thicken naturally as it cools and beating it enough once cooled is more difficult. Let it cool for a few moments but not for too long.

Try This Tip

Boiling Eggs - Avoiding Cracks

From klp66
  • 14
  • 2

Asked and Answered

Cocoa Powder in Olive Oil Chocolate Cake

From aquilyra
  • 14
  • 2
Why Did My Fudge Remain Smooth After Beating? | Ask Nigella.com (2024)

FAQs

Why Did My Fudge Remain Smooth After Beating? | Ask Nigella.com? ›

Our answer

What makes fudge smooth? ›

For first-time candy makers: Look for recipes that call for corn syrup, marshmallows, or marshmallow crème. These ingredients prevent crystallization of sugar into large grains, so the texture of the fudge will remain smooth. Also, recipes using cream or condensed milk are less likely to curdle than regular milk.

Why is my fudge not grainy? ›

The key to successful, nongrainy fudge is in the cooling, not the cooking. The recipe calls for heating the ingredients to the soft-ball stage, or 234° F, then allowing it to cool undisturbed to approximately 110° F.

How do you make homemade fudge firmer? ›

​Harden the fudge:​ Place your container or tins in the fridge for 2 hours, which is the time it takes for the fudge to set. Once it's hardened, cut the fudge into 12 pieces or remove it from the muffin tins. Store in the fridge or the freezer (if you don't devour it right away).

Why did my fudge turn out like caramel? ›

Fudge can turn into caramel due to overcooking or undercooking, incorrect temperatures, or wrong ingredients.

What is the secret to smooth fudge that is not gritty? ›

Grainy Fudge

To avoid this issue, swirl the pan instead of stirring it with a spoon. You can use a wet pastry brush to wipe down any sugar that sticks to the sides of the pot.

What should fudge look like after beating? ›

The fudge is then beaten as this makes the fudge slightly crumbly rather than chewy. Beating the mixture encourages the formation of small sugar crystals, which leads to the crumbly texture. The crystals may not be noticeable in themselves but the fudge mixture will thicken and turn from shiny to matte in appearance.

How to fix soft fudge? ›

How do you fix fudge that is too soft? Bring the fudge back to a boil with 1–2 US tbsp (15–30 ml) of cream. If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream.

Can you fix fudge that didn't set? ›

OPTION 4) If you think the reason it didn't set was because you didn't heat it to the right temperature, you could try putting it back into the pan and re-cooking.

Why does my fudge stay soft? ›

there is too much leftover water in the syrup and the resulting fudge is soft. To save the fudge, put it in a saucepan with 15 to 30 ml (1 or 2 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil until the thermometer reaches 114 to 115 °C (237 to 239 °F).

What not to do when making fudge? ›

7 Common Mistakes to Avoid for Candy Shop-Worthy Fudge and Caramels
  1. Using the Wrong Pan. All candy and confections start by melting sugar. ...
  2. Stirring the Sugar. ...
  3. Not Using a Candy Thermometer. ...
  4. Leaving Out the Parchment Paper Lining. ...
  5. Skipping the Cooking Spray. ...
  6. Scraping the Pot. ...
  7. Using a Cold Knife to Slice.
Dec 16, 2015

When to stop beating fudge? ›

Once the mixture has cooled enough, use a wooden spoon or an electric hand mixer to beat the fudge until you see the very first signs of the mixture shifting from glossy to matte. Believe yourself when you think you see them! If you over-mix the fudge it will set in your pot.

Why did my homemade fudge not harden? ›

The most common culprit behind unset fudge is inaccurate temperature control. If the sugar mixture hasn't reached the correct temperature, your fudge won't set. Ensure you use a reliable candy thermometer and follow temperature guidelines meticulously to achieve the desired consistency.

Can you over beat fudge? ›

Fudge usually behaves this way when it's not cooked to a high enough temperature (due to oversight or a faulty candy thermometer). If your fudge is tough, hard, or grainy, then you may have made one of several mistakes: You may have overcooked it, beaten it too long, or neglected to cool it to the proper temperature.

Do you stir fudge while boiling? ›

Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.

What should the consistency of fudge be? ›

You know it's ready when a small amount of the mixture dropped into a glass of cold water sets into a soft ball that you can lift out with a teaspoon and pinch between your fingers. Turn off the heat and keep stirring for 5 minutes or until the mix starts to thicken a little.

What gives fudge the creamy texture and dull appearance? ›

The addition of egg whites and gelatin will coat the sugar crystals and keep them small. This results in creamy fudge. Shhh! It's a Fudgy Secret!

How do you make fudge consistency? ›

The cold water test

Drop a piece of hot fudge into a glass filled with ice water. It should form a soft ball that can easily flatten between your fingers. Repeat this test every two minutes, each time using a clean spoon, until the fudge has the desired consistency.

What to do with fudge that didn't harden? ›

Options for what you can do with your unset fudge:

OPTION 1) Depending on how runny it is, you can either use it as a frosting for cakes, or a sauce for ice-cream. OPTION 2) Freeze it overnight.

Top Articles
Latest Posts
Article information

Author: Laurine Ryan

Last Updated:

Views: 5508

Rating: 4.7 / 5 (77 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Laurine Ryan

Birthday: 1994-12-23

Address: Suite 751 871 Lissette Throughway, West Kittie, NH 41603

Phone: +2366831109631

Job: Sales Producer

Hobby: Creative writing, Motor sports, Do it yourself, Skateboarding, Coffee roasting, Calligraphy, Stand-up comedy

Introduction: My name is Laurine Ryan, I am a adorable, fair, graceful, spotless, gorgeous, homely, cooperative person who loves writing and wants to share my knowledge and understanding with you.