By Kevin Armstrong
Tesla's Model S Plaid is the fastest car MotorTrend has ever tested
Edmunds
Tesla's Model S Plaid is the most impressive car on the road today. It's not just that it looks great, but it has some serious power underneath the hood... or frunk. Recently, MotorTrend tried the Tesla Model S and declared it the fastest car they have ever tested. That's saying something.
MotorTrend first appeared on magazine stands in 1949. With more than 70 years of experience driving thousands of cars, the Model S Plaid beat them all.
0-60 MPH in 2.3 Seconds
The Tesla Model S Plaid is a high-speed car, and the stats back it up. According to MotorTrend, the Model S accelerates from 0-60 MPH in an astonishing 2.3 seconds.
"When experiencing the acceleration of a Plaid, it's abundantly clear that virtually the only force you feel is the Tesla's seatback hurling you forward to a degree that genuinely makes the horizon the floor. Except that floor is rushing up at you far faster than any free fall ever could."
Earlier in the article, the author explains that a free fall speed equates to accelerating from 0-60 in 3 seconds.
The Tesla website says the Plaid can go faster than MotorTrend reported, with a 1.99 second 0-60 time. Its three mighty electric motors, two in the back, power the all-wheel drive system producing a ridiculous 1,020 horsepower and 1,050 ft-lb of torque. The top speed is pegged at 200 MPH; for comparison, the maximum speed in NASCAR last season was recorded at 190.7 MPH.
Tesla Model S Plaid Specs
| Spec | Value |
| Curb Weight: | 4,816 lbs |
| ¼ Mile Time: | 9.3 seconds at 152.2 mph |
| Motor Layout: | Tri-motor, one front, two rear |
| Maximum Horsepower: | 1,020 hp |
| Maximum Torque: | 1,050 lb-ft |
| Top Speed: | 200 MPH |
| Cost: | $119,990 |
Model S Plaid Does the Quarter Mile in 9.3 Seconds
The power curve on Tesla's Model S Plaid speaks for itself
Tesla
Tesla's Model S also laid down a blistering quarter-mile to earn the title of the fastest car MotorTrend has ever tested. The blue Plaid devoured the quarter mile time in 9.3 seconds. It should've been a red Model S because this car was burning the record books and lighting the track on fire.
It's not just the motors; the cutting-edge software and aerodynamic design also contribute to its superior acceleration.
60-0 MPH Braking in 104 Feet
In addition to its blistering quarter-mile time, the Model S is able to achieve 60-0 mph braking in just 104 feet, while providing a maximum lateral acceleration of 1.02 Gs. This makes it one of the quickest cars ever produced and gives it the performance capabilities that rival some of the world's top supercars.
In other tests, the Plaid had a record stopping time as low at 98 feet. The impressive stopping power of the Model S can be attributed to its combination of powerful brakes and low center of gravity. The regenerative braking system also helps reduce wear on the brakes and allows for maximum braking performance. In addition, the Model S also features an advanced stability control system that helps to keep the car stable and in control during hard braking maneuvers.
Top 10 Fastest Electric Cars
| Car | 0-60 MPH Time |
| 2021 Tesla Model S Plaid | 2.3 Seconds |
| 2020 Porsche Taycan Turbo S | 2.4 Seconds |
| 2022 Lucid Air Grand Touring Performance | 2.7 Seconds |
| 2022 Audi RS E-Tron GT | 2.9 Seconds |
| 2022 Mercedes-AMG EQS 4Matic+ Sedan | 3.0 Seconds |
| 2022 GMC Hummer EV Edition 1 | 3.0 Seconds |
| 2022 Rivian R1T Launch Edition | 3.1 Seconds |
| 2023 Kia EV6 GT | 3.2 Seconds |
| 2023 BMW iX M60 | 3.2 Seconds |
| 2022 Rivian R1S Launch Edition | 3.2 Seconds |
The Tesla Model S Plaid, which added track mode in 2021, has pushed the performance boundaries and set a new standard for high-performance electric vehicles. Its quarter-mile time of 9.3 seconds is remarkable, and its ability to reach 0-60 mph in just 2.3 seconds is extraordinary. Elon Musk wrapped it up best, responding to a tweet about MotorTrends results. He tweeted: Plaid is sickkk.
Subscribe
Subscribe to our newsletter to stay up to date on the latest Tesla news, upcoming features and software updates.
By Karan Singh
CheekyTesla
Tesla’s Service Mode, a feature that allows both users and technicians to diagnose and view vehicle information, has had several features added to it recently. Chief among them for everyday Tesla owners is a health meter for your vehicle’s Cabin Filter.
Cabin Filter Health
The update displays a “Cabin Filter Health” UI in the HVAC section of Service Mode. This health readout is shown as a percentage of health, with a lower number indicating that the cabin filter needs to be replaced. However, we’ve also seen some users report they had a value over 100%. The health meter is intended to provide an approximation of the useful life of your Cabin Air filter.
Tesla likely approximates the health of the cabin filter based on the filter's age and how many hours the HVAC system has been used. It may also consider the fan speed of the HVAC system to account for higher airflow through the filter.
When to Replace
In general, Tesla recommends replacing the Cabin Air Filter every 2 years, and that the HEPA filter, for vehicles with access to Bio-Weapon Defence Mode, be replaced every 3 years, but this can vary depending on usage and the amount of debris going into the cabin.
Tesla is one of the few manufacturers, if not the only one, that runs air continuously through the cabin filter, regardless if it’s coming in from the outside or inside the vehicle when the recirculating air option is on. This helps the air inside the vehicle to become cleaner as it continues to be filtered.
How to Replace
The Cabin and HEPA Air filter replacement procedure is straightforward and could be a DIY task. Tesla provides instructions on a model-by-model basis on how to replace them, but in general, the basic steps are below.
The filter replacements can differ based on model year as well. High-voltage connections are also passing through the HVAC module, so extra caution is needed. We recommend reading your vehicle’s specific instructions before proceeding. They will advise against touching any electrical connections.
Basic Replacement Instructions
1. Turn off Climate Control
2. Remove the passenger-side floor mat and move the seat fully back.
3. Use a pry tool to release the clips that hold the right-side front footwell cover to the instrument panel, and then disconnect the two electrical connectors inside.
4. Working from top-to-bottom, use a trim tool to release the right-side panel from the center console.
5. A single T20 screw secures the cabin filter cover, remove the screw and cover.
6. Fold the 2 tabs securing the filter away, and then pull the upper and lower filters out.
7. Ensure that the arrows on the new filters face towards the rear of the vehicle, and install them.
8. Proceed through steps 6-1 in reverse to reassemble.
Once again, these steps vary by vehicle configuration, model year, and do not apply to legacy vehicles without a heat pump.
By Karan Singh
Not a Tesla App
Tesla’s Autowipers have been a long-standing issue for customers, as well as Tesla’s engineers. Elon Musk has often mentioned that improvements to Autowipers have been around the corner for years, but they appear to have taken a rain check.
Tesla owners often complain that their wipers are running against a completely dry windshield on a sunny day, or not running at all in light rain. Moderate to heavy rain performance seems to be improved for the most recent update to Auto Wipers.
In our test, we cover the vehicle's windshield with Post-It notes to find out what the vehicle’s cameras can see.
We cover the windshield in Post-It notes
Not a Tesla App
The Water Problem
Tesla vehicles lack a rain sensor. This is a result of Tesla’s strategy to rely upon Tesla Vision to replace all sensors – which they’ve successfully used most recently to replace the ultrasonic parking sensors (USS) on their vehicles. Tesla believes that vision is the solution to achieving all self-driving capabilities, and this includes the elimination of extraneous sensors such as USS and radar.
Of course, many other vehicles employ simple rain sensors that do function fairly well, and effectively detect the presence of water on the windshield. So, what’s stopping Tesla Vision from doing the same thing?
The problem isn’t Tesla’s detection methods, it’s the view of the windshield Tesla has. Water droplets are small and the three front cameras only capture a small portion of the entire windshield, making it difficult for them to capture and acknowledge the fact that there is water on the windshield that needs to be wiped away. This is in addition to the fact that the cameras are focused further away, to drive and navigate the vehicle effectively, rendering the visuals close to the camera blurry – leaving a rather technical challenge.
Our Test
The car's wide-angle camera
Not a Tesla App
Even Tesla’s front-facing, wide-angle camera can barely see the yellow Post-In notes in our test, let alone the blue Post-It notes spread through the windshield. Tesla’s other front-facing camera, the “main” camera, see only see a trace of the Post-Its along the bottom. In reality, Tesla has no idea what’s on the vehicle's windshield and can only make assumptions based on a few square inches near the top of the windshield.
Tesla's main camera view
Not a Tesla App
Tesla’s third front-facing camera, the “narrow” view, is only available on hardware 3 and it’s just a zoomed-in version of the main camera, which causes it to miss our Post-It notes completely. With hardware 4, Tesla removed the narrow camera and now determines the narrow view by cropping the main camera, which has a higher resolution in hardware 4.
Tesla’s Engineering Magic
Tesla is able to detect drops on the windshield when they land in front of the camera cluster, but again, since the cluster is mounted high above most of the windshield, this can lead to the windshield filling up with water droplets before a wipe is triggered.
They’ve also tried using the vehicle’s other cameras, such as the repeater or B-pillar cameras to detect falling rain – which can help the Autowiper system build confidence that there is water on the windshield. Once it has enough confidence, it triggers a wipe – or changes the wipe modes. However, in reality, it has very little knowledge of what’s actually on the windshield.
Wiping Away Challenges
The transition to entirely vision has left a considerable challenge for Tesla’s very capable engineering teams. The current Autopilot hardware suite lacks a good view of the windshield itself, but it can detect falling rain. Given that Tesla’s software can detect and display other vehicles using turn signals, it is also possible that they could detect other vehicles using wipers or use other cameras to see rain on the vehicle, such as the B-pillar cameras, to increase the system’s confidence that a wipe is required.
However, these solutions are likely to not be perfect, as they don’t provide an accurate representation of what the driver sees in the windshield, but instead an accurate representation of what the vehicle itself can see.
When engaging FSD on a lightly rainy day, your car may drive perfectly, but you’ll have a windshield full of rain when supervising!
Of course, there are many other reasons to run the windshield wipers beyond simple rain – spray and debris from vehicles in front, water falling from trees or being kicked up by deep puddles, or even snow settling on the windshield. Another challenge is bugs – they leave sticky smears at higher speeds when impacting the windshield, causing spots that can impede either vehicle vision or driver vision.
Future Solutions
Tesla likes to avoid solutions that only solve a single problem – such as adding a rain sensor. It is an additional manufacturing complication, adds additional cost to vehicles, and segments Tesla’s vehicles between model years.
On the other hand, cameras have solved many problems over the years – such as Tesla Vision taking over from the USS system that was present on pre-2022 Tesla vehicles. While it did take until FSD V12 for Autopark to become available to vision-only vehicles, the upgraded Vision-based Autopark is a marked improvement over the older USS solution.
Another such problem has been auto-high beams, which were solved with better oncoming vehicle detection and improved AI – which has led to a feature that is much better than its original implementation. This updated implementation has also led to improvements in the use of Matrix headlights – a feature that for now is only available in Europe and China due to legislative issues in the US.
Tesla is most likely going to be pushing another hardware revision – Hardware 5 – in the coming years. Some of the indications of this include the Cybertruck’s bumper camera – which is also expected to arrive in the Model X and Model S in the future.
There is a chance that Tesla may include a forward-facing interior at some point – to solve the fact that Vision is unable to currently see the windshield. However, Tesla also strongly believes they’ll achieve level 4 or 5 of vehicle autonomy in the future, so they could also be banking on autonomy removing the need for good auto wipers.
A Personal Example
If you get into your Tesla on a rainy day or add some drizzle via a watering jug, you can see how Tesla’s Autowipers will not activate unless water is placed directly in front of the camera cluster. You can also spray some water onto the camera housing and take a seat inside and use the camera preview to view what the cameras can see. It’ll provide you with a blurry, limited view of what the cameras see.
We may see further software improvements, but it may be a difficult engineering problem to solve with the limited camera capabilities that currently exist on hardware 3 and hardware 4 vehicles.
