Navage Nasal Care | Nose Cleaner Cleaning Instructions (2024)

Navage Nasal Care | Nose Cleaner Cleaning Instructions (1)

Navage Nasal Care | Nose Cleaner Cleaning Instructions (2)

WARNING: It's important to clean your Naväge Nose Cleaner after each use. When you rinse it, separate the parts (upper tank, mechanical module and lower tank), and use theCountertop Caddyto allow it to dry thoroughly. This makes it very easy to keep your Naväge Nose Cleaner fresh and clean!

Navage Nasal Care | Nose Cleaner Cleaning Instructions (3)

Upper and Lower Tanks: Detach and hand-wash after use with liquid soap.

Mechanical Module: Wipe the underside of the white Mechanical Module with a cloth dampened with liquid soap. The Mechanical Module is not waterproof. Do not immerse or rinse the underside with running water, as this can force water into the battery compartment and cause corrosion.

Drain Pipes, Nose Pillows, and Nasal Dock: Use the included Scrubber to thoroughly clean the inside surfaces of these parts. To clean the Drain Pipes, put a drop of liquid soap on the Scrubber and insert it as shown in Figures 10 and 11. To rinse, lift the Drain Pull (C in Fig. 9 above) and run hot water through the opening. To clean the Nose Pillows and Nasal Docks, detach them and follow the same cleaning steps.

Crushing Chamber Lid: See Fig. 9 and rinse areas A and B with hot water for 30 seconds to melt any salt crystals.

Clean thoroughly and always your Nose Cleaner dry completely between uses: Separate the Tanks, Nasal Dock, and Nose Pillows from the Mech Module, and place them in the Countertop Caddy after each use.

Deep cleaning: Spray parts with an anti-bacterial sprayevery 10 uses.Let sit 10 minutes and rinse thoroughly, but do not rinse underside of Mechanical Module.

The Naväge Nose Cleaner is not dishwasher safe. Exposing the tanks to high heat can warp them and prevent their sealing to the mechanical module. Running the Nose Cleaner through a dishwasher voids the warranty.

The The Navage Custom Cleaning Kit is recommended. Clean your Naväge Nose Cleaner quickly and easily with special cleaning tools, check out theNaväge Custom Cleaning Kit

Rinsing and Cleaning Instructions

BACK

Navage Nasal Care | Nose Cleaner Cleaning Instructions (2024)

FAQs

Navage Nasal Care | Nose Cleaner Cleaning Instructions? ›

Deep cleaning: Spray parts with an anti-bacterial spray every 10 uses. Let sit 10 minutes and rinse thoroughly, but do not rinse underside of Mechanical Module. The Naväge Nose Cleaner is not dishwasher safe. Exposing the tanks to high heat can warp them and prevent their sealing to the mechanical module.

Can you clean Naväge with tap water? ›

WARNING: DO NOT USE TAP WATER UNLESS STERILIZED BY BOILING.

What kind of soap to clean Naväge? ›

After each use, DO: * Do clean the upper and lower tanks, nose pillows, and nasal dock. Simply detach them from the white center module, and wash them using anti-bacterial dishwashing soap or a solution of one-half white vinegar and one-half water.

Can you use Naväge twice in a row? ›

Nasal irrigation is safe and effective, and because it is all-natural and drug-free, you can do it as often as you wish. To quickly get the hang of it, we recommend using your Navge several times in a row when youre first learning.

Can I clean my navage with vinegar? ›

Anti-bacterial dishwashing soap or diluted white vinegar (half-water, half-vinegar) are recommended cleaning agents. Center module. Wipe the center module with a damp cloth.

Can your nose be too clogged for Navage? ›

Do not use if your nasal passages are 100% blocked and you cannot breathe through either nostril. 100% sinus blockage is rare, and nasal irrigation can help relieve even the most stuffed up sinus condition.

How many times a day can you use Naväge Nose Cleaner? ›

You can use the Naväge Nose Cleaner as often as you wish! We suggest you use Naväge twice a day, just like brushing your teeth. However, Naväge is completely natural and drug-free, and health professionals agree that it's safe to use as often as needed or wanted.

Is it better to use purified or distilled water for Navage? ›

Nasal irrigation is generally safe, but it is essential to keep the device clean and use sterile, treated water sources. “You should use distilled or sterile water, filtered water or previously boiled water that has cooled to a lukewarm temperature,” Dr. Odisho said.

Does Navage clean both sides? ›

Absolutely! To be clear, The way nasal irrigation works is that the entire nasal cavity is cleansed, flushed, and moisturized during a single irrigation cycle. One side of the nasal cavity is cleaned as the rinse flows into it; the other side as the rinse flows out of it.

Top Articles
Latest Posts
Article information

Author: Ouida Strosin DO

Last Updated:

Views: 6026

Rating: 4.6 / 5 (56 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Ouida Strosin DO

Birthday: 1995-04-27

Address: Suite 927 930 Kilback Radial, Candidaville, TN 87795

Phone: +8561498978366

Job: Legacy Manufacturing Specialist

Hobby: Singing, Mountain biking, Water sports, Water sports, Taxidermy, Polo, Pet

Introduction: My name is Ouida Strosin DO, I am a precious, combative, spotless, modern, spotless, beautiful, precious person who loves writing and wants to share my knowledge and understanding with you.